Spotify Connect - PALONA Tuner 190C Benutzerhandbuch

Tuner 190C
5.7.3 Settings
Scan settings /Choose FM at first, it will go to a specific station playing.
Then press "Menu" on the device or on the remote control to get above
table.
By default, FM scans stop at any available station. This may result in a
poor signal-to-noise ratio (hiss) from weak stations. To change the scan
settings to stop only at stations with good signal strength, select Yes after
choosing Strong station only.
Audio settings
All stereo stations are reproduced in stereo. For weak stations, this may
result in a poor signal-to-noise ratio (hiss). To play weak stations in mono,
select FM weak reception: Listen in mono only and then YES.
5.8

Spotify Connect

Using This Device With Spotify Connect
A better way to listen at home
Spotify Connect lets you play Spotify through your home speakers or TV,
using the Spotify app as remote.
You'll need Spotify Premium to use Connect, see details overleaf.
Step 1. Add your new device to the same wifi network as your phone,
tablet or PC (see product user instructions for details).
Step 2. Open the Spotify app on your phone, tablet or PC, and play any
song.
Step 3. If you're using the app on a phone - tap the song image in the
bottom left of the screen. For tablet and PC move to step 4.
Step 4. Tap the Connect icon
Step 5. Pick your device from the list. If you can't see it, just check it's
connected to the same wifi network as your phone, tablet or PC.
All done! Happy listening.
26 - EN