PALONA Tuner 190C Benutzerhandbuch Seite 55

Tuner 190C
 PBC Wlan setup
Push Button Configuration, it is to connect the AP that supports WPS (Wi-
Fi Protected Setup).
 View settings
View the information of current connected network: Active connection, MAC
address, Wlan region, DHCP, SSID, IP address, Subnet mask, Gateway
address, Primary DNS and Secondary DNS.
 Wlan region
Select the Wlan region to obtain the optimal Wlan connectivity: Canada,
Spain, France, Japan, Singapore, Australia, and Republic of Korea.
 Manual settings
Choose wired or wireless network connection and enable or disable DHCP
(Dynamic Host Configuration Protocol).
 Network profile
Tuner190C remembers the last four wireless networks it has connected to,
and automatically tries to connect to whichever one of them it can find.
From here you can see the list of registered networks. You can delete
unwanted networks by turning and pressing then choosing YES to
confirm delete.

Keep network connected
If you choose to keep network connected, the WiFi will not disconnect even
you are in standby mode. Otherwise, the connection will only available.
This option allows Tuner190C to be ready for DLNA streaming in any
operating modes. Details for DLNA streaming, refer to Section 5.5.
5.2.4 Time/Date
Set the time manually or auto update, time format, time zone and daylight.
5.2.5 Language
The default language is Germany. Change it as your preference.
14 - EN