Network Requirement; Safety Precaution - PALONA Tuner 190C Benutzerhandbuch

Tuner 190C

1. Network Requirement

 A broadband connection in combination with a wired/wireless access
point, router or similar network device.
 The network device needs to support Ethernet (LAN) wired connection
or WiFi (802.11b/g/n 2.4GHz) wireless connection.
 PC, tablet or smartphone with network connected. This network has to
be the same one as the Tuner 190C equipped with.

2. Safety Precaution

 Do not drop the Tuner 190C and do not expose it to liquid, moisture or
humidity. These might lead to damage to the device.
 If the Tuner 190C is moved from a cold environment into a warmer one,
do let it adapt to the new temperature before operate the device.
Otherwise, it might lead to condensation and cause malfunctions in the
device.
 Do not use the Tuner 190C in the dust environment as dust can damage
the interior electronic components and lead to malfunctions in the
device.
 Protect the Tuner 190C from strong vibrations and place it on stable
surfaces.
 Do not attempt to disassemble the Tuner190C.
 Only use the power adaptor delivered with the Tuner190C.
 The socket outlet should be installed near the Tuner190C and should be
easily accessible.
 Never touch the power plug with wet hands and never pull on the power
cable when pulling the plug out of the power socket.
 Make sure the electrical voltage specified on the Tuner 190C and its
power plug is corresponding to the voltage of the power socket.
Incorrect voltage will destroy the device.
 If the Tuner190C is not using for a long period of time, disconnect it from
the power supply by unplugging the power plug. This is to avoid the risk
of fire.
 Always power off the Tuner190C when cleaning it.
 Never use any harsh or strong solvents to clean the Tuner190C since
these may damage the surface of the device. Dry, soft cloth is
appropriate, however, if the Tuner190C is extremely dirty, it may be
4 - EN