Factory Reset; Software-Update; Backlight; Internet Radio - PALONA Tuner 190C Benutzerhandbuch

Tuner 190C

5.2.6 Factory reset

A factory reset resets all user settings to default values, so that time and
date, network configuration and presets are lost. However, the Tuner190C
's current software version is maintained, as is registration with the Internet
radio portal. Internet radio favourites therefore remain unless you re-
register your Tuner190C with another account on the portal website.
5.2.7 Software update
From time to time, software upgrades may be created with bug fixes and/or
additional features. You can either check manually or set Tuner190C to
check periodically automatically (this is the default). If newer available
software is detected, you will be asked if you want to go ahead with an
update. If you agree, the new software is then downloaded and installed.
After a software upgrade, all user settings are maintained.
NOTE: Before starting a software upgrade, ensure that Tuner190C is
plugged into a stable main power connection. Disconnecting power during
an upgrade may permanently damage the unit.
5.2.8 Info
View the firmware version and the radio ID.
5.2.9 Back light
You may change the backlight of each environment (power on or standby)
to High, Medium or Low. And adjust the timeout duration which the radio
turns to standby backlight level when it has not been controlled.
5.3

Internet Radio

Tuner190C can play thousands of radio stations and podcasts from around
the world though a broadband Internet connection.
When you select Internet radio, Tuner190C directly contacts the Frontier
Silicon Internet radio portal (which is supported by v-tuner) to get a list of
stations.
The portal also enables multiple lists of favourite stations that you can
personalize.
EN - 15