Inserting And Removing Burs - B.A. International BA ULTIMATE Gebrauchsanweisung

6556083.book Seite 22 Montag, 18. April 2016 4:35 16
5 Operation
22
5.2

Inserting and removing burs

IMPORTANT: Check the push button to make sure it moves freely!
Free movement of the pushbutton
NOTICE! Use only burs and diamond polishers that are sharp and
Use only undamaged burs
undamaged. Use clean burs and diamond polishers to avoid dirt in the
clamping system.
CAUTION! A loose or partially removed bur can detach itself from the
Drill Fixation _ Turbine
head or break off. This may cause injury! Therefore, use the turbine only
if the bur is inserted at least 10 mm and is clamped securely in place.
Operating Instructions BA ULTIMATE
65 56 083 D3560.201.10.02.02