LENCO Xemio-241 Bedienungsanleitung Seite 9

4. Shuffle
4.1 During playback, Shortpress (2) twice to activate the shuffle and the
"Status LED (3)" will slow blink in Blue each 3~4 seconds once.
4.2 Shortpress the " (2)" twice to exit the shuffle function. The
"Status LED (3)" will now blink once per second.
E. Indicator LED status
 Playing mode (order):
 Playing mode (shuffle):
 Pause mode:
 PC connection mode:
 Charging mode:
 Charging complete:
F. Resetting the device
1. In some circumstances it can happen that the player may not respond.
If this happens it is possible to reset the device.
2. Press and hold the " (2)" button for 8 ~ 10 seconds, the player should
turn off itself and resets.
3. After resetting you can turn on the device again by press and hold the
" (2)" button. The device should now work as normal again.
NOTE: No data will be lost after this reset.
G. Troubleshooting
Play cannot turn ON
No sound is heard
Downloading of
music files is failing
LED light flashes in blue once per second.
LED light flashes in blue each 3 seconds.
LED light will be continuously lit in blue.
LED light flashes rapidly to indicate data
transferring mode (Charging in the
background)
LED light flashes red once every second.
LED light will be continuously lit in red.
 Check if battery is low.
 Check whether Volume is set to "minimum"
level and connect the earphone plugs firmly.
 Check whether the earphone plug is dirty.
 Destroyed WMA/MP3 may make a static
noise and the sound may cut off. Make sure
that the music files are not destroyed.
 Check whether music files format are
supported.
 Check whether player's USB plug is
connected properly.
 Check whether driver is installed correctly.
 Check whether the player's memory is in full.
9