LENCO Xemio-241 Bedienungsanleitung Seite 6

Brief View of Player
A. Outlook and Controls
1
1. 3.5mm Jack:
2. Button:
3. Status LED:
4. button:
5. button:
6. Micro USB Jack:
7. Back Clip
B. About MP3 Player Battery
This MP3 Player has an internal, non–user-replaceable rechargeable lithium
battery. When you first time use this MP3 player, Please charge it for about
3 ~ 4 hours untill the "Status LED (3)" is solid Red. The status led will flash
red during charging.
Note: The MP3 Player continually consumes a little battery power in off mode.
To maintain the battery life and performance, if it isn't going to be used for a
long time, the battery needs to be recharged at least once per month.
1 Charging the MP3 player:
1.1 You can charge the MP3 Player in two ways;
1.2 Connect player to your computer's USB port. Or;
1.3 Use the USB power charger. (adapter not included)
1.4 Disconnect the USB cable when charging is finished
2 Notes on charging the battery
2.1 The Player is not a waterproof device and the 3.5mm earphone jack
is not water resistant.
2.2 Do not use this MP3 player with wet hands. it may cause damage to
the device.
2
Earphone set
To On/Off, Play/Pause, Shuffle, Reset
For charge/play status
To increase volume or play next song
To decrease volume or play previous song
For Charge/PC Connection
3
4
5
6
6
7