Blackout Function; Storing The Current Scene; Cleaning And Maintenance; Technical Specifications - EuroLite FD-512 Bedienungsanleitung

Blackout Function

A short actuation of the button BLACKOUT sets all control channels to the value zero simultaneously. The
yellow LED above the button lights as a check. The position of the channel faders has no effect during this
process. Thus, e.g. all DMX fixtures can be turned off.
By pressing the button once again, the blackout function is switched off. The LED will be extinguished and all
channels return to their previous output values.

Storing the Current Scene

The current scene with the values of all control channels can be stored permanently into the internal
memory. This scene is automatically sent to the output each time the unit is switched on and may be used
for a suitable basic illumination
1
Use the channel faders to adjust all control channels to the desired output values for the scene. The
flash and blackout functions do not affect the storage.
2
For storing, keep the button BLACKOUT pressed until the corresponding yellow control LED flashes
repeatedly.

7. CLEANING AND MAINTENANCE

We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts. Should you have further questions, please
contact your dealer.

8. TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
Number of control channels:
DMX512 output:
Dimensions (LxWxH):
Weight:
Accessory:
Mounting frame for FD-512
Please note: Every information is subject to change without prior notice. 09.01.2014 ©
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
100-240 V AC, 50/60 Hz ~ via included power unit
1 W
512
3-pin and 5-pin XLR connector
292 x 178 x 59 mm
2 kg
No.
70063813
16/16 00081147.DOCX, Version 1.0