Manovra di sblocco manuale ● Manual release ● Manuelle Entriegelung
FIG. 1
IT
ATTENZIONE: eseguire le operazioni di sblocco e blocco ante in assenza di tensione di rete e con motore fermo.
SBLOCCO E FUNZIONAMENTO MANUALE
Aprire lo sportellino copriserratura come indicato al punto 1.
Inserire e ruotare la chiave in dotazione di 90° in senso orario, come indicato al punto 2.
Ruotare la maniglia di sblocco in senso antiorario, come indicato al punto 3.
Movimentare a mano le ante.
RIPRISTINO DEL FUNZIONAMENTO AUTOMATICO
Per ribloccare le ante, ruotare la maniglia di sblocco in senso orario.
Ruotare la chiave di 90° in senso antiorario.
Estrarre la chiave e chiudere lo sportellino copriserratura.
Tutti i diritti relativi alla presente pubblicazione sono di proprietà esclusiva di ROGER TECHNOLOGY.
ROGER TECHNOLOGY si riserva il diritto di apportare eventuali modifiche senza preavviso. Copie, scansioni, ritocchi o modifiche sono espressamente vietate senza
un preventivo consenso scritto di ROGER TECHNOLOGY.
EN
WARNING: only perform the gate leaf release and lock procedures with the unit disconnected from mains and with the motor at a standstill.
RELEASE AND MANUAL OPERATION
Open the lock cover as indicated in step 1.
Insert the key included into the lock and turn clockwise by 90°, as indicated in step 2.
Turn the lever anticlockwise, as indicated in step 3.
Move the leaves manually.
RESTORING AUTOMATIC OPERATION
To lock the gate leaf again, turn the lever clockwise.
Turn the key anticlockwise by 90°.
Remove the key and close the lock cover.
ROGER TECHNOLOGY is the exclusive proprietor holder of all rights regarding this publication.
ROGER TECHNOLOGY reserves the right to implement any modifications without prior notification. Copying, scanning or any alterations to this document are
prohibited without express prior authorised from by ROGER TECHNOLOGY.
DE
ACHTUNG: Die Entriegelung und Verriegelung der Torflügel bei unterbrochener Netzspannung und stehendem Motor durchführen.
ENTRIEGELUNG UND MANUELLER BETRIEB
Die Abdeckklappe des Schlosses wie in Punkt 1 angegeben öffnen.
Den mitgelieferten Schlüssel einstecken und um 90° im Uhrzeigersinn drehen, wie im Punkt 2 angegeben.
Den Hebel gegen den Uhrzeigersinn drehen, wie im Punkt 3 angegeben.
Die Torflügel von Hand bewegen.
WIEDERHERSTELLUNG DES AUTOMATISCHEN BETRIEBS
Um die Torflügel wieder zu verriegeln, den Hebel im Uhrzeigersinn drehen.
Den Schlüssel um 90° gegen den Uhrzeigersinn drehen.
Den Schlüssel herausziehen und die Abdeckklappe des Schlosses schließen.
Alle Rechte bezüglich dieser Veröffentlichung sind ausschließliches Eigentum von ROGER TECHNOLOGY.
ROGER TECHNOLOGY behält sich das Recht vor, eventuelle Änderungen ohne Vorankündigung anzubringen. Kopien, Scannen, Überarbeitungen oder Änderungen
sind ohne vorherige schriftliche Zustimmung durch ROGER TECHNOLOGY ausdrücklich verboten.
2
1
3
FIG. 2
2
3
1
V