Inhaltszusammenfassung für Roger Technology MONOS4
Seite 1
IS201 Rev00 12/02/2019 MONOS4 Automazione per cancelli a battente Swing gates automations Automatisierung für Drehtore Automatisme pour portails à battant Automatismos para cancelas batientes Automações para portões de batente Istruzioni originali ISTRUZIONI E AVVERTENZE PER L’INSTALLATORE INSTRUCTIONS AND RECOMMENDATIONS FOR THE INSTALLER ANWEISUNGEN UND HINWEISE FÜR DEN INSTALLATEUR...
Il presente manuale di installazione è rivolto esclusivamente a personale qualificato. ROGER TECHNOLOGY declina qualsiasi responsabilità derivante da un uso improprio o diverso da quello per cui è destinato ed indicato nel presente manuale. L’installazione, i collegamenti elettrici e le regolazioni devono essere effettuati da personale qualificato nell’osservanza della Buona Tecnica e in ottemperanza alle norme vigenti.
This installation manual is intended for qualified personnel only. ROGER TECHNOLOGY cannot be held responsible for any damage or injury due to improper use or any use other the intended usage indicated in this manual. Installation, electrical connections and adjustments must be performed by qualified personnel, in accordance with best practices and in compliance with applicable regulations.
Unterschrift Alle Rechte bezüglich dieser Veröffentlichung sind ausschließliches Eigentum von ROGER TECHNOLOGY. ROGER TECHNOLOGY behält sich das Recht vor, eventuelle Änderungen ohne Vorankündigung anzubringen. Kopien, Scannen, Überarbeitungen oder Änderungen sind ohne vorherige schriftliche Zustimmung durch ROGER TECHNOLOGY ausdrücklich verboten. Diese Bedienungsanleitung und die Gebrauchsanweisungen für den Installateur werden auf Papier geliefert und sind in der Produktverpackung enthalten.
Contrôler si la structure existante est suffisamment solide et stable. ROGER TECHNOLOGY n’est pas responsable de la non-observation des règles de la bonne technique en ce qui concerne la construction des portes et des portails à motoriser, ainsi que des déformations qui pourraient se produire lors de l’utilisation.
Compruebe que la estructura existente cumple los requisitos de resistencia y estabilidad. ROGER TECHNOLOGY no se hace responsable de la falta de rigor a la hora de construir con buena técnica las puertas donde van a instalarse los dispositivos, como tampoco de las deformaciones que puedan producirse con el uso de los mismos.
áreas de esmagamento, corte, transporte e de perigo em geral. Verifique se a estrutura existente tem os necessários requisitos de robustez e estabilidade. ROGER TECHNOLOGY não é responsável da não observância da Boa Técnica na fabricação dos infixos a motorizar, e também das deformações que devessem intervir no uso.
Seite 8
IMPIANTO TIPO SERIE MONOS • STANDARD INSTALLATION MONOS RANGE • ANLAGETYP SERIE MONOS • INSTALLATION TYPE SÉRIE MONOS • INSTALACIÓN TIPO SERIE MONOS • SISTEMA DO TIPO SÉRIE MONOS 230Vac DESCRIZIONE DESCRIPTION BESCHREIBUNG DESCRIPTION DESCRIPCIÓN DESCRIÇÃO Automatismo MONOS Automatism MONOS Automatisierung MONOS Automatisme MONOS Automatismo MONOS...
Seite 9
DIMENSIONI • DIMENSIONS • AUSSENMASSE • DIMENSIONS • DIMENSIONES • DIMENSÕES 1223 1180 Tutte le misure riportate sono espresse in mm, salvo diversa indicazione. All measurements are expressed in mm unless otherwise indicated. Alle angegebenen Abmessungen sind in mm ausgedrückt, sofern nichts anderes angegeben. Toutes les mesures reportées sont exprimées en mm, sauf indication contraire.
Seite 10
Electromechanical gear motor BRUSHLESS for swing gates weighing up to 450 kg, up to 4 m wide wing Elektromechanischer Getriebemotor BRUSHLESS für Drehtore bis zu 450 kg, Flügelbreite bis zu 4 m MONOS4 Motoréducteur électromécanique BRUSHLESS pour portails à batant jusqu’à 450 kg, largeur vantail jusqu’à 4 m Motorreductor electromecánico BRUSHLESS para cancelas batietes de 450 kg de peso máx., 4 m de anchura máx.
Seite 11
• Il MONOS4 NON è provvisto di finecorsa elettrici o fermi meccanici interni, è in- • MONOS4 is NOT equipped with electrical limit devices or internal mechanical...
Seite 12
é fluido e regular durante todo o seu curso sem atritos. • MONOS4 N’est PAS pourvu de fins de course électriques ou de butées mécan- • O MONOS4 NÃO é equipado com fim de curso elétrico ou com retentores iques, il est indispensable de toujours prévoir une butée mécanique d’arrêt en...
Seite 13
FISSAGGIO STAFFE • BRACKETS FASTENING • BEFESTIGUNG DER BÜGEL • FIXATION DES ÉTRIERS • FIJACIÓN DE LOS ESTRIBOS • FIXAÇÃO DOS SUPORTES FIXATION DES ÉTRIERS FISSAGGIO STAFFE 1. Définir la hauteur de fixation du piston du sol (fig. 1). 1. Definire l’altezza di fissaggio del pistone dal suolo (fig. 1). 2.
Seite 14
Fig. 1 Fig. 2 KT204/R KT245 mm ≤200 Fig. 3 STOP CLOSE STOP OPEN Fig. 4...
Seite 15
INSTALLAZIONE AUTOMAZIONE • INSTALLATION DRIVE UNIT • INSTALLATION DES ANTRIEBS • INSTALLATION DE ACTIONNEUR • INSTALACIÓN DEL ACTUADOR • INSTALAÇÃO ACCIONADOR INSTALLAZIONE INSTALLATION • Il pistone MONOS può essere installato indifferentemente a destra o a sinistra. • Le piston MONOS peut être installé indifféremment à droite ou à gauche. •...
Seite 16
COLLEGAMENTI ELETTRICI • ELECTRICAL CONNECTIONS • ELEKTRISCHE ANSCHLÜSSE • CONNEXIONS ÉLECTRIQUES • CONEXIONES ELÉCTRICAS • LIGAÇÕES ELÉCTRICAS 1. Svitare le quattro viti inferiori e togliere il coperchio. 1. Dévisser les quatre vis inférieures et enlever le couvercle. 2. Svitare il passacavo. 2.
Seite 17
Schale von MONOS4 verbinden. al guscio superiore del MONOS4. 2. Für die Inbetriebnahme von MONOS4 ist es NICHT NOTWENDIG den 2. NON È NECESSARIO per la messa in funzione del MONOS4, eseguire il Erdungsanschluss durchzuführen. collegamento di messa a terra.
Seite 18
MONOS4. debajo de la envolvente superior de MONOS4. 2. NÃO É NECESSÀRIO para a colocação em funcionamento do MONOS4, 2. Para poner en funcionamiento MONOS4, NO ES NECESARIO realizar la realizar a ligação à terra.
Seite 19
MANUTENZIONE PERIODICA • PERIODICAL MAINTENANCE • REGELMÄSSIGE WARTUNG • ENTRETIEN PÉRIODIQUE • MANTENIMIENTO PERIÓDICO • MANUTENÇÃO PERIÓDICA NOTA: Per l’eventuale riparazione o sostituzione dei prodotto dovranno essere uti- REMARQUE : Pour l’éventuelle réparation ou remplacement des produits, seules lizzati esclusivamente ricambi originali. des pièces de rechange originales devront être utilisées.
Seite 20
ROGER TECHNOLOGY Via S. Botticelli 8 • 31021 Bonisiolo di Mogliano Veneto (TV) • ITALIA P.IVA 01612340263 • Tel. +39 041.5937023 • Fax. +39 041.5937024 info@rogertechnology.com • www.rogertechnology.com...