Installation Of The Ballhead; Technical Data - Rollei Slim LED S Anleitung

Installation of the ballhead

Screw the 1/4" screw thread of the ballhead into one of the 1/4" screw
thread inputs of the LED light . Then use the 1/4" screw thread to screw
the ballhead onto a tripod or on the cold shoe to fix it to a hot shoe .
Note: Please make sure that the tripod is secured with weights to avoid
the LED tipping over when tilted too much .

Technical data

Number of LEDs
Power
Energy efficiency class B
Illuminance
Brightness range
Colour rendering index 95+ (CRI)
Colour temperature
Effects
Power supply
Connections
Powerbank
Dimensions | Weight
Box content
Note: The Slim LED S can also be used as a power bank via the USB
output (output 5 V
135 (45 white light / 45 warm light / 45 RGB)
12 W
1,174 lux (0 .5 m) 5500K
1 – 100
3200 – 5600K
21
Rechargeable lithium polymer battery (3 .7 V /
4,000 mAh / 14 .8 Wh), input max . 5 V
USB-C charging port (5 V
(5 V 2 A), 2x 1/4" screw thread
USB-A output with 5 V
151 x 80 x 11 .5 mm | 205 g
Slim LED S, ballhead with 1/4" screw thread,
cold shoe with 1/4" screw thread, USB-C cable,
manual
2 A) .
2 A
2 A), USB-A output
2 A
21