Driver Fatigue Alert; Motion Detection - Snooper DVR-4HD Benutzeranleitung

3.2.7 Driver Fatigue Alert

If the Driver Fatigue Alert function is enabled, this product produces voice and screen message alerts one
hour after it has begun recording and repeats the alerts every half an hour afterwards.
To set the driver fatigue alert, do the following:
1. Touch to enter main menu.
2. Touch to switch over to Driving Safety Main
Menu.
3. Touch / to select
Fatigue Alert menu, then touch
(on).
4. Touch to return to record screen.
Note:
The Driving Safety functions such as LDWS, FCWS, Front Vehicle Go, Headlight warning, Speed Cam Alert,
Speed Limit Alert, Driver Fatigue Alert and ACC/DEC Alert will be disabled, if the product doesn't connect with
the external power supply.

3.2.8 Motion Detection

If Motion Detection is activated, turned off the car adapter when the device is powered on, the system alert
message "Wait for 10 seconds to enter Motion Detection, or touch screen to power off." will be displayed on
the screen. This means the system will enter Motion Detection automatically in 10 seconds, when the device
detects any motion in front of lens, Video Record will be activated for a duration the same as the length
setting. If the screen is touched anywhere in 10 seconds, then this product powers off instead of entering
Motion Detection mode.
To set the motion detection, do the following:
1. Touch to enter main menu.
2. Touch to switch over to Driving Safety Main
Menu.
3. Touch / to select
Detection menu, then touch
(on).
4. Touch to return to record screen.
for entering Driver
again to activate
for entering Motion
again to activate
EN • 25
DVR 4HD 2015 V1.1 12/4 MultiLing
© copyright 2015