Headlight Warning - Snooper DVR-4HD Benutzeranleitung

6. Once your car's location is determined by GPS, this
product starts to detect the motion of car in front of
you after your car remains motionless for 20 seconds.
It produces voice and screen message alerts when
the movement of the car in front of you changes its
images in the camera.
Note:
1. Front Vehicle Go is only applicable when satellite positioning is in ready state. Make sure satellite
positioning of your device is ready if you want to activate this function. Satellite positioning function is
dependent on the model purchased.
2. The Driving Safety functions such as LDWS, FCWS, Front Vehicle Go, Headlight warning, Speed Cam
Alert, Speed Limit Alert, Driver Fatigue Alert and ACC/DEC Alert will be disabled, if the product doesn't
connect with the external power supply.
3. The Front Vehicle Go function may give false alarms in poor conditions, including rainy or cloudy weather,
at night, or in poor lighting environments. Drivers are advised to exercise discretion based on actual road
conditions.
4. The product will recalibrate 30 seconds later after the initial alert if the Front Vehicle Go function has been
activated. If the vehicle remains in a stationary mode and the product detects image changes in the front
lens, the product will once again trigger the voice and screen message alerts.

3.2.4 Headlight Warning

The Headlight Warning function produces voice and screen message alerts when it detects poor lighting
conditions through the recording displays of this product, including driving in rainy or cloudy weather, at
night, and in basements, parking lots, and tunnels.
To set the headlight warning, do the following:
1. Touch to enter Main Menu.
2. Touch to switchover to Driving Safety Main
Menu.
3. Touch / to select
Warning function menu, then touch
enable the function (on).
4. Touch to return to record screen.
for entering Headlight
again to
EN • 22
DVR 4HD 2015 V1.1 12/4 MultiLing
© copyright 2015