Led Indicator; Powering The Device On / Off; Auto Power On/Off; Manual Power On/Off And Reset - Snooper DVR-4HD Benutzeranleitung

2.4 LED Indicator

Status Explanation
Power off, battery charging
Power off, battery full charged
Power on, battery charging
Power on, battery full charged
Standby / Standby and screen off
Recording/ Recording and screen off

2.5 Powering the Device On / Off

2.5.1 Auto Power On/Off

Once the vehicle engine is started, the device automatically turns on. If the Automatic Record function is
enabled, the recording will automatically start right after the device turns on.
Please refer to Set Automatic Record (2.6.1).

2.5.2 Manual Power On/Off and Reset

2.5.2.1 Manual Power On

Push the power switch and make sure that the power switch locks
on the memory card slot.

2.5.2.2 Power Off

Push the power switch and make sure that the memory slot is
released and the device starts power off sequence. Do not power
on the device when it is in the power-off sequence, or the recorded
file may become corrupt.

2.5.2.3 Reset the device

In case the device fails to function normally due to unknown causes, push the power switch and verify the
memory card is in the removable state; wait for 7 seconds and push the power switch again to restart the
device.
LED Indicator Color
Red
LED light off.
Red
Green
Green
Flash red
EN • 11
On
DVR 4HD 2015 V1.1 12/4 MultiLing
© copyright 2015
Off