Operation; Remote Control - Concept KV0800 Betriebsanleitung

EN

OPERATION

This portable air conditioning unit is equipped with 3 modes: cooling, dehumidification and fan. The fan has two speeds:
high and low. The display also shows operating functions, temperature, fault diagnosis and protection functions.
SWING MODE TIMER UP
• Set temperature (effective only in cooling mode): 17 ~ 30 °C for cooling, dH is displayed, operation with low air flow
is not adjustable.
• Temperature measurement accuracy: ±1 °C.
• Fan speed: high speed, low speed (2 fan speeds).
• Timer mode: timer on and off settings within 24 hours.
• Sleep mode: only cooling is effective.
• Swing function: swinging up and down.
• Temperature display (in degrees Celsius). Display of faults by self-diagnostics. Memory function in case of power
failure. Infra-red remote control.
• The control panel is equipped with a digital LED display and LED indicators.
Once connected, the appliance switches to standby mode.
ON/OFF BUTTON
Press the button to switch the device on or off, if it is on.
MODE BUTTON
Press to switch between cooling, dehumidifying and fan modes. The LED indicator can light up different colours depending
on the mode, which makes signalling easier. The blue colour is used for cooling.
The green colour is used in fan mode. The orange colour is used in dehumidification mode.
UP AND DOWN BUTTONS
These buttons can be used to set the desired temperature between 17-30 °C. After pressing the "TIMER" button, they are
also used to set the timer time.
FAN SPEED BUTTON
IN COOLING AND FAN MODE: Press to switch between high and low fan speed.
IN DEHUMIDIFICATION MODE: By default, the fan will be set to a low speed that cannot be changed.
68
DOWN SLEEP MODE SPEED POWER
SUPPLY
KV0800 / KV1000
TIMER BUTTON
The timer function cannot be combined or repeated.
ON TIMER: When the appliance is in standby mode, press the "TIMER" button to set the switch-on time. Press the UP and
DOWN buttons to adjust the timer duration (1 to 24 hours). The timer indicator light lights up. The appliance switches on
after the set number of hours has elapsed.
OFF TIMER: When the appliance is switched on at the desired setting, press the "TIMER" button to set the switch-off time.
Press the UP and DOWN buttons to adjust the timer duration (1 to 24 hours). The timer indicator light lights up. The
appliance switches off after the set number of hours has elapsed.
SLEEP BUTTON
Pressing this button puts the appliance into sleep mode immediately, only the sleep mode light is on, the other indicators
turn off, and the fan speed automatically changes to low. Press again to exit sleep mode and resume operation.

REMOTE CONTROL

The air conditioning unit can be controlled with the remote control. Two AAA batteries are required to use the remote control.
UP: press the up arrow button to increase
the desired temperature or set the timer
duration.
DOWN: press the down arrow button to
decrease the desired temperature or set
the timer duration.
TIMER: Press the "TIMER" button to set
the on or off timer time
KV0800 / KV1000
EN
You can switch to cooling mode by
pressing the "Cool" button.
FAN: You can switch between high and
low fan speed by pressing the "FAN"
button.
POWER SUPPLY: Press this button to
switch the appliance on or off.
69