Werbung
Verfügbare Sprachen
Verfügbare Sprachen
configuration manually. Enter
an IP Address, IP Mask (also
known as Subnet Mask), and
Gateway. You must specify an IP
address. If you are unsure about
the IP Mask and Gateway, leave
the default settings. Click Next
and proceed to step I.
I
The Security Settings screen will
appear. Choose from WEP or
WPA PSK. If your network has WEP
encryption enabled, then select
the level of WEP encryption,
and enter a Passphrase. The
WEP key will be automatically
generated. If you want to
manually enter the WEP key,
leave the Passphrase field blank
and enter the WEP key in the Key
1 field. If your network has WEP
encryption disabled, keep the
default, Disabled. Then click
Next.
If your network has WPA PSK
enabled, then select WPA PSK
from the drop-down menu.
Select TKIP for the algorithm,
then enter a Pre-Shared Key of
8-32 characters. Click Next.
J
Review your settings on the
Confirmation screen. Write
down the Bridge's IP Address if
you want to access the Bridge's
Web-based Utility. Click Yes to
save these settings.
K
On the Congratulations screen,
click Exit.
The default IP address of
NOTE:
the Bridge is 192.168.1.226.
For more security infor-
NOTE:
mation, refer to "Appendix B:
Wireless Security." in the User
Guide on the CD-ROM.
I
1
I
2
K
5
Werbung
