Led Indicators - Axis Communications A1601 Installationsanleitung

Specifications
Text marked with UL is only valid for UL 293 or UL 294 installations.

LED indicators

LED Color
Network
Green
Amber
Unlit
Status Green
Amber
Red
Power Green
Amber
Relay Red
overcurrent
Unlit
Reader Red
overcurrent
Unlit
Relay Green
Unlit
1. Relay is active when COM is connected to NO.
Note
• The Status LED can be configured to flash while an event is active.
• The Status LED can be configured to flash for identifying the unit. Go to Setup >
Additional Controller Configuration > System Options > Maintenance .
AXIS A1601 Network Door Controller
Indication
Steady for connection to a 100 MBit/s network. Flashes for
network activity.
Steady for connection to a 10 MBit/s network. Flashes for network
activity.
No network connection.
Steady green for normal operation.
Steady during startup and when restoring settings.
Slow flash for failed upgrade.
Normal operation.
Flashes green/amber during firmware upgrade.
Steady when short circuited or if overcurrent has been detected.
Normal operation.
Steady when short circuited or if overcurrent has been detected.
Normal operation.
1
Relay active.
Relay inactive.
19