Panasonic JS-950-Serie Bedienungsanleitung Seite 36

■ Operation
Attention for capacitive touch screen
(1) Do not touch it by nail, because capacitive touch screen can not recognize it. Touch it by
finger tip.
(2) Do not touch it during startup. It initializes touch screen during startup. If it is touched during
startup, touch screen is not initialized correctly.
(3) Do not touch on around display (bezel) as much as possible, otherwise it has possibility of
effect to detection accuracy of sensor.
(4) It has possibility of shift of calibration by effect of change atmosphere.
In case of calibration shifted, do calibration adjustment.
(5) The reaction of the input might be slow by operator's constitution. In case of this situation,
execute the adjustment of sensitivity.
(6) Change the setting each terminal when you use the two or more terminals.
* Inquire to the supplier about the sensitivity adjustment and the change setting of the terminals.
Carrying/moving terminals
Do not hold display unit by hands. Hold main unit by hands.
Display angle adjustment
Take care not to place the fingers between Display and Main Unit when the angle of Display is
adjusted.
It has possibility of injury.
And also, adjust display angle with both hands.
36