Symbols On The Product - Zenoah GZ3500T Bedienungsanweisung

13. Air purge
14. Choke control
15. Throttle trigger lockout
16. Throttle trigger
17. Stop switch
18. Guide bar
19. Saw chain
20. Bar tip sprocket
21. Fixing eye for safety line
22. Clutch cover
23. Product and serial number plate
24. Chain tensioning screw
25. Chain catcher
26. Spiked bumper
27. Operator's manual
28. Guide bar cover
29. Combination spanner

Symbols on the product

Careless or incorrect use of this product can
result in serious or fatal injury to the operator
or others.
Read the operator's manual carefully and
make sure you understand the instructions
before you use this product.
Always wear approved protective helmet,
approved hearing protection and protective
goggles or a visor.
This product is in accordance with
applicable EC Directives.
Noise emission to the environment
according to the EC Directive. The product's
emission is specified in the Technical data
chapter and on the label.
Both of the operator's hands must be used
to operate the chainsaw.
Never operate the chainsaw holding it with
one hand only.
Never let the guide bar tip come in contact
with any object.
308 - 004 - 27.09.2017
Warning! Kickback may occur when the
nose or tip of the guide bar touches an
object, and cause a lightning fast reverse
reaction, kicking the guide bar up and
towards the operator. May cause serious
personal injury.
Use appropriate protections for foot-leg and
hand-arm.
Chain brake, activated (right). Chain brake,
not activated (left).
Air purge.
Adjustment of the oil pump.
Refuelling.
Chain oil fill.
yyyywwxxxxx
Note: Other symbols/decals on the product refer to
certification requirements for certain markets.
This chainsaw should only
be used by persons who
are specially trained in
tree maintenance work.
See operator's manual!
Working position.
Choke.
The rating plate showing
serial number. yyyy is the
production year, ww is the
production week.
3