AC Schnitzer G06 Montageanleitung Seite 14

F it t in g In s t r u c t io n s
AC Schnitzer Seitenschweller G06
Fitting (cont`d.)
Fig. 7
Attach the AC Schnitzer side skirt using the spread
rivets supplied in the front and rear holes previously
drilled, and spread the spread rivets lightly
Warning:
Do not spread the rivets completely.
Fig. 8
Check the position of the AC Schnitzer side skirt, align
if necessary and drill a 5,5 mm hole through all further
holes (10 in total) present in the AC Schnitzer side
skirt.
Warning:
Only drill through the side skirt panel.
Remove spread rivets at front and rear, and remove
the AC Schnitzer side skirt again.
Fig. 9
Sand down the AC Schnitzer side skirt in the adhesive
region, and clean using the cleaner supplied.
AC Schnitzer Neuenhofstraße 160
Fitting Instructions No: 5171 306 310 / Issue: 25.01.2021 / TSch
D 52078 Aachen
14
Tel. 0241/5688 -130 / www.ac-schnitzer.de