AC Schnitzer G06 Montageanleitung Seite 13

F it t in g In s t r u c t io n s
AC Schnitzer Side Skirt G06
Fitting (cont`d.)
Fig. 4
The contour of the AC Schnitzer side skirt must lie
against the contour of the standard side skirt.
Fig. 5
Attention must be paid to the contours of the rear
wheel arch.
Fix the AC Schnitzer side skirt with adhesive tape
if necessary.
Fig. 6
After aligning the AC Schnitzer side skirt, drill a 5,5
mm hole through the existing front and rear holes in
the AC Schnitzer side skirt.
Warning:
Only drill through the side skirt panel.
AC Schnitzer Neuenhofstraße 160
Fitting Instructions No: 5171 306 310 / Issue: 25.01.2021 / TSch
D 52078 Aachen
13
Tel. 0241/5688 -130 / www.ac-schnitzer.de