AC Schnitzer G06 Montageanleitung Seite 10

G e n e r a l N o t e s !
AC Schnitzer Side Skirt G06
Important Notes !
These Fitting Instructions must be read in full before beginning installation work. AC Schnitzer bears no liability for
damage caused by incorrect installation !
These Fitting Instructions are intended solely for use by authorised AC Schnitzer dealers. These Fitting Instructions are
in all cases directed at professionals trained in BMW vehicles who have the corresponding specialist knowledge.
All diagrams show LHD vehicles, for RHD vehicles proceed accordingly or follow separate Fitting Instructions.
As manufacturer, we are obliged to point out that any changes you make to a vehicle licensed for use on public roads
require approval by a test centre and registration in the vehicle documents.
As the legal regulations may vary according to location, please contact the competent authorities for information.
Fitting
Carry out all work in accordance with applicable safety regulations (e.g. wear safety goggles).
Components and surfaces to be glued together must first be thoroughly cleaned with cleaner !
The adhesive drying time is 24 hours. The vehicle can be washed in a car wash after approx. 48 hours.
only in conjunction with M-Aerodynamic SA-715
Fitting time (1 unit = 5 minutes)
The fitting time is 10 unit.
Requires tool
Tape
Drill Ø 5,5mm
Cordless screwdriver
AC Schnitzer Neuenhofstraße 160
Fitting Instructions No: 5171 306 310 / Issue: 25.01.2021 / TSch
D 52078 Aachen
10
Tel. 0241/5688 -130 / www.ac-schnitzer.de