Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
User Manual
Soldering iron kit 30 W
1
Safety Instructions
1.1
General
•
Read the user manual completely and carefully before use.
It is part of the product and contains important information for correct use.
•
Keep this user manual.
It must be available for uncertainties and passing the product.
Notes for network separation
The product has no power switch and may be used only in easily acces-
sible outlets to quickly remove it in an emergency and after use.
Voltage-free only with pulled plug.
•
In case of emergency, during thunderstorms and after use,
pull the product on its plug housing!
•
Do not open the housing.
•
Do not modify product and accessories.
•
Use product, product parts and accessories only in perfect
condition.
•
In case of questions, defects, mechanical damage, troub -
le and other problems, non-recoverable by the documentati-
on, contact your dealer or producer.
•
Installation, assembly, maintenance and repair work must be
carried out only by trained electrical specialists.
Not recommended for children and people with physical and / or mentally
limited capabilities.
•
Secure packaging, small parts and insulation against acciden-
tal use.
•
NEVER let the product unattended in use.
•
Place, install and transport product, product parts and acces-
sories in a safe way.
•
Mind placing cables in a way, nobody will be disabled and the
cable not be damaged.
•
Protect your eyes and body from solder splashes by wearing
appropriate work clothing.
•
Do not use the device to heat liquids or plastics.
•
Do not touch the metal parts of the soldering iron during and
immediately after use.
The soldering iron reaches temperatures above 520°C. Touching the
heated metallic parts can cause serious burns to people and animals.
•
Always place the soldering iron in the holder provided after
use.
•
Do not immerse the soldering iron in water to cool it down.
•
Avoid proximity to flammable surfaces and substances and
explosive materials.
•
Do not operate the product in a potentially explosive environ
ment.
•
Only carry out soldering work in well-ventilated rooms or
under a suitable fume hood, as soldering fumes are hazar-
dous to health.
•
Avoid stresses such as heat and cold, moisture and direct
sunlight, microwaves, vibrations and mechanical pressure.
•
Only carry out soldering work on current- and voltage-free
parts.
For use in industrial plants, the relevant legal regulations for accident
prevention must be observed.
•
Switch off the soldering iron during longer work breaks.
•
When soldering cables and contacts, make sure that bare
metal parts are protected against contact e.g. by insulation.
•
During repair work, the manufacturer's recommendations for
the use of suitable soldering agents such as soldering paste,
soldering tincture, etc. must be observed.
2
Description and Function
2.1
Soldering iron kit 30 W
This product is a set consisting of soldering iron, soldering iron holder, soldering
tin, soldering tip and rosin. It is used to produce conductive metal compounds and
serves as a simple alternative to the soldering station.
2.2
Operating elements and parts
1
2
3
7
1
Soldering iron
2
3
Soldering iron holder
4
5
Soldering tin (lead free)
6
2.3
Scope of Delivery
Soldering iron, soldering iron holder, soldering tin, replacement soldering tip, rosin
and user manual
2.4
Specifications
Soldering iron
Connections
Rated voltage (V~ @ Hz)
REV2020-07-21
V2.1 ir
Subject to change without notice.
4
5
6
Soldering tip
7
replacement soldering tip
Safety plug
Rosin
Safety plug
220-240, 50
Power consumption (W)
Protection class
Protection level
Cable length (m)
Dimensions (ØxL) [mm]
Weight (g)
Dimensions (ØxL) [mm]
Amount (g)
Material
Amount (g)
Dimensions (mm)
Weight (g)
3
Intended Use
Your product is designed for domestic use and soft soldering applications
only.This means that it may only be used for soldering / desoldering
electrical and electronic components in printed circuits and modules, for
Tin plating of conductor tracks and cable ends and used to make cable connections.
Any use other than that described in chapter „Description and Function" or in the
„Safety Instructions" is not permitted.
This product may only be used in dry indoor rooms. Non-observance and non-com-
pliance with these regulations and the safety instructions can lead to serious
accidents, personal injury and damage to property.
4
Preparing
Caution! Under no circumstances should the soldering iron be
operated without a soldering tip.
1.
Check the scope of delivery for completeness and integrity.
2.
Compare the specifications of product, power supply and
peripherals.
These must be identical.
3.
Place the supplied holder on a flat, fireproof surface.
4.
Make sure that the soldering tip is firmly seated in the solde-
ring iron.
5.
Connect the mains plug to a mains socket.
The soldering iron is ready for use. and integrity
5
Assembling and Connecting
Caution! Risk of injury by stumbling
•
Lay the cables in a safe way.
•
Mind placing cables in a way, nobody will be disabled
and the cable not be damaged.
•
Do not carry out any work on live parts.
1.
Turn the Y punch form of the soldering iron holder approxi-
mately 90° to the top.
2.
Place the soldering iron holder on a fire-resistant and non-
slipping, horizontal surface.
3.
Place the accessory as required on the surface.
Additional accessories such as other soldering tip sizes and a solder
sponge may be necessary.
4.
Refer to chapter "Replacing the soldering tip" to changing the
soldering tip.
5.
Prepare the solder joint by eliminating excess insulation,
grease, dirt or oxidation.
6.
Fix the parts to be soldered as best as possible.
6
Soldering
Caution! Hot surfaces
The soldering tip and the front part of the soldering iron get
hot when plugged-in.
•
Avoid close proximity to flammable surfaces.
•
Pull the mains plug before working on the unit
and allow to cool for a few minutes.
- 3 -
30
I
IP20
~1.2
30 x 204
168
Rosin
45 x 20
10
Solder tin
Sn: 99.3 %, Cu: 0.7 % (lead free)
10
Soldering iron holder
65 x 41 x 2
10
by Wentronic GmbH | Pillmannstraße 12
38112 Braunschweig | Germany
45242
Goobay
®
Werbung
