Install The Camera - Berger & Schroter 32134 Bedienungsanleitung

2.5 Install the camera

In order to achieve good image effect and make sure the camera can work safely,
please install the camera on steady surfaces. Strap or holders are available to in-
stall it.
2.5.1 Use strap to install
Pass through the buckles behind the camera with a strap , then install it on a tree
or other sturdy place, fasten the strap. Please see below pictures.
2.5.2 Use holder to install
Install the mounting bracket reliably on the fixed object (e.g. wall or tree), screw
the supporting screw into the screw hole at the bottom of the camera, and tighten
it.
Adjust the camera angle and tighten all the screws. As following picture shows:
Strap
Tighten the holder
into screw hole
44