Stamp; Password Protection - Berger & Schroter 32134 Bedienungsanleitung

4.19 Stamp

This function is to set whether or not the stamp information would be displayed on
photo / video files,choose "Time & Date" it shows time and date stamp on the photo
and video, choose date, it only shows date stamp , choose "off" it will shows no sta-
mp (Pic4-18).
1. Press (MENU) key to shift to the "Settings" menu;
2. Press (UP) or (DOWN) key to select "Stamp", press (OK) key to enter into the sub-
menu interface;
3. In the sub-menu interface, press (UP) or (DOWN) key to select : time&date/date/off.
4. Press (OK) key to confirm saved and back to "Settings" menu, press (MENU) key
to back to main interface.
Pic 4-19
Settings
Stamp

Password protection

WIFI SSID
WIFI Password
Auto WIFI off
Format memory card
MENU Back
4.20 Password
This function is to set the camera's boot password to protect your privacy. After setting
the password, you need to enter your password every time you start the machine
(Pic4-19).
1. Press (MENU) key to shift to "Settings" option;
2. Press (UP) or (DOWN) key, select "Password", press (OK) key to enter into the
sub-menu interface;
3. In the sub-menu interface, press (UP) or (DOWN) key, select whether or not set
the password: OFF /ON; While selecting "OFF", it stops setting the password. While
selecting "ON", there comes a setting interface, press (OK) key to enter into the "
Password" setting operation, press (UP) or (DOWN) key to set the password, press
(OK) key to switch among 4-bit numbers.
4. Press (OK) key to confirm saved and back to "Settings" menu, press (MENU) key
to back to main interface.
Notice:
Users need to keep their passwords in mind.
If the users forget the power-on password, they can use the super password "1111"
to enter the camera.
OK Select
56
Pic 4-20
Settings
Stamp
Password protection
WIFI SSID
WIFI Password
Auto WIFI off
Format memory card
MENU Back OK Select