Thinkware U1000 Kurzanleitung Und Garantie Seite 12

Connecting and arranging the power cable
When the engine and electrical accessories are turned off, connect the
car charger.
2
• The hardwiring cable (optional) must be professionally installed to the
vehicle by a trained mechanic.
• Use the authentic THINKWARE car charger. Use of third party power
cables may damage the product and result in electrical fire or
electrocution due to the voltage difference.
• Do not cut or modify the power cable yourself. Doing so may damage the
product or the vehicle.
• For safe driving, arrange the cables to prevent the driver's vision from
being obstructed or interfering with driving. For more information about
arranging cables, visit www.thinkware.com.
10
1. Connect the car charger to the
1
2. A rrange and fix the power cable
product's DC-IN power port and
insert the cigar jack into the vehicle's
power socket.
using the adhesive cable holders.
Refer to the figure on the left for
the recommended locations for the
adhesive cable holders.