Repair; Returning The Device; Cleaning; Disposal - Stahl 9851/5 Betriebsanleitung

operating instruction

9.3 Repair

Repairs to the unit may only be carried out by R. STAHL.
Fixtures may only be replaced by identical devices.

10 Returning the device

Only return or pack the devices in consultation with R. STAHL! For this purpose, contact
the responsible R. STAHL representative. R. STAHL's customer service is available for
the return shipment in case of repair or service.
 Contact customer service personally. or
 Call up the r-stahl.com website.
 Select "Support" > "RMA form" > "Request RMA certificate".
 Fill in the form and send it off. You will automatically receive an RMA certificate by e-
mail. Please print this file.
 Send the device together with the RMA certificate in the packaging to R. STAHL
Schaltgeräte GmbH (for address, see chapter 1.1).

11 Cleaning

Check the device for damage before and after cleaning. Take damaged devices out of
operation immediately.
 To avoid electrostatic charging, the devices may only be cleaned in explosion-
hazardous areas may only be cleaned with a damp cloth.
 For damp cleaning: Use water or mild, non-abrasive, non-scratching cleaning agents.
non-abrasive, non-scratching cleaning agents.
 Do not use aggressive cleaning agents or solvents.
 Never clean the housing with a strong water jet, e.g. with a high-pressure cleaner!

12 Disposal

Observe national and local regulations and legal requirements for disposal.
 Dispose of materials separately for recycling.
 Ensure environmentally compatible disposal of all components in accordance with
the legal requirements.

13 Accessories and spare parts

NOTICE! Malfunction or device damage due to the use of non-original components.
Non-observance can lead to property damage.
 Only use original accessories and original spare parts from R. STAHL Schaltgeräte
GmbH (see data sheet).
Ex nR Control Panel 9851/5
english
31