Medtronic ONE-PRESS-SERTER Bedienungsanleitung Seite 9

Inserting the sensor
WARNING: Wear gloves to insert the sensor into someone other than yourself to avoid contact with
patient blood. Minimal bleeding may occur. Contact with patient blood can cause infection.
1
1. Wash your hands.
4
4. Open the sensor
package.
2
2. Choose an insertion site that has a sufficient
amount of fat on the abdomen.
5
5. Remove the pedestal
from the package.
Place the pedestal on
a flat surface.
6
6. Make sure that the adhesive tab is tucked under
the sensor connector and sensor snaps.
- 9 -
3
3. Clean the insertion site
with alcohol. Let the
area air dry.