Medtronic ONE-PRESS-SERTER Bedienungsanleitung Seite 15

5. For details on how to enter your sensor settings into your pump or monitor, refer to the
corresponding user guide.
6
6. Connect the 7. Wait for the green
transmitter to the
sensor.
7 8a
8a. Remove the
light on the
transmitter to flash.
If the green light
on the transmitter
does not flash,
refer to the
Troubleshooting
section of your
transmitter user
guide.
8b
8b-8c. Cover the transmitter with the
adhesive liner
from the adhesive
tab.
- 15 -
8c
adhesive tab. Do not pull the
tab too tightly.