BEARWARE 304579 Bedienungsanleitung Seite 18

Then press the "V+" button again. You can then set the next program time at
which the connected device has to be switched off (OFF).
Configure the time and days of the week as described in the previous step.
Note: Please remember that the days of the week for switching on and switching
off have to be configured separately. The selected combination is not automatical-
ly adopted for the entire timer programme.
You can choose between all 20 (1-20) programs and program them as desired
using the "V+" and "V-" buttons.
A total of 20 timer programs are available, which you can configure in this
way. Once all the programs have been customised as needed, please press the
"CLOCK" button to return back to the time display. The display again shows the
current time and the day of the week. The timer is ready to use.
Note: Please ensure that the times of the individual timer programmes do not over-
lap in order to avoid unintentional switching on or off.
To disable a switching program again or to re-enable a disabled program, navigate
to the desired program and press the "ON/OFF" button.
9. Switching on and off manually
You can manually switch on and switch off the device connected to the timer
using the "ON/OFF" button with hand symbol or re-enable the automatic control
according to the configured timer programs.
18
English