BEARWARE 304579 Bedienungsanleitung Seite 17

After charging, press the RESET button using a pointed object to clear or com-
pletely reset the current configuration of the timer. The device is now ready for
use. The following sections of this manual describe how to make the individual
settings.
7. Setting the current time
Press the "CLOCK" button to display the time. Then press the "SET" button. The
current day of the week flashes in the timer display.
Set the days of the week using the "V+" and "V-" buttons, and then confirm using
the "SET" button. Then repeat the process for the hour and minute display.
8. Setting the timer programs
Make sure the timer mode is in "AUTO". To do this, press the "ON/OFF" button in
time mode until the "AUTO" option (4) is shown on the display.
Press the "V+" button briefly. The program menu is shown in the display. You can
first set the time at which the connected device has to be switched on (ON).
Press the "SET" button to set the appropriate program. Set the days of the week
using the "V+" and "V-" buttons, and then confirm using the "SET" button. Repeat
the process subsequently for the hour and minute display.
17
English