General Points; English - Kripsol PH300.C Anleitung

Manual proyector:Proyector Plano.qxd 12/12/2011 16:33 Página 8
1. DESCRIPTION
1.1 KRIPSOL underwater lights are
manufactured from white, injection
moulded ABS, a material which is
unaltered by physical and chemical
agents, and
polypropylene.
1.2 TECHNICAL CHARACTERISTICS.
KRIPSOL underwater lights are designed
for use a 300 watt parabolic bulb.
They should be used submerged in
fresh or slightly treated water.
We do not recommend that the light unit be
fitted at a depths of more than 1,5 m. For fitting
at greater depths, consult our technical department.
The degree of protection of the
underwater light is IP68. The safety
voltage is 12V (alternating current).
The underwater light has beendesigned
and assenbled according to the international
safety standards CEI 60598-2-18: 1993
(Luminaires for Swimming Pools and
Similar Applications)
This underwater lights is an electrical
receptor class III (S/RBT.MI BT 031, PTO 1.2).
The manufacturer is not responsible
for assembly, installation, operational
start-up, handling or the incorporation
of components that have not been
made in the manufacturer's facilities.

2. GENERAL POINTS

2.0 INTRODUCTION.
This manual contains the instructions
necessary for the installation, use and
maintenance of KRIPSOL underwater
lights in a swimming pool. In order to
obtain the performances described in
the specifications
recommendations given in this manual
in fibre-reinforced
sheet, all the
8
must be complied with and followed
correctly.
This will make it possible to use the lights
in a way that ensures that they are safe
and long lasting.
The equipment supplier will provide the
user with complementary information if he
so requires.
2.1 SAFETY SYMBOLS USED IN THE
INSTRUCTION MANUAL.
Instructions which refer to personal
safety are marked with the following
symbols:
Caution
General
Hazard
Standard
DIN 4844-W8
DIN 4844-W9
Other instructions relating to operation
which must be complied with in order to
avoid physical damage to the equipment
are marked thus:
CAUTION
2.2 LIABILITY.
Failure to comply with the instructions
given by the manufacturer in this
manual regarding the
handling, installation,
start-up and maintenance of the lights
shall free the manufacturer or distribuitor
from any possible liability for accidents
affecting persons or damage to other
installations, and shall, moreover, result
in the cancellation of the guarantee.
Caution Risk
of Electric
Shock
Standard
selection,
operational

ENGLISH