Packaging, Transport And Storage; Installation And Assembly - Kripsol PH300.C Anleitung

Manual proyector:Proyector Plano.qxd 12/12/2011 16:33 Página 10
4. PACKAGING, TRANSPORT
AND STORAGE
4.1
CAUTION
The manufacturer supplies the lights
protected by appropiate packaging to
ensure that during transport or storage
they do not suffer damage that would
prevent their correct installation and/or
operation.
4.2
CAUTION
The user, on receiving the lights, should
check the following points:
- Condition of the external packaging. If it
shows signs of significant deterioration,
the delivery service should be formally
notified.
- Also, check the state of the contents.
If any damage is apparent that may
prevent correct functioning, the supplier
should be formally notified within 8 days
of reception.
4.3
CAUTION
The storage conditions shall be such as
to guarantee the correct state of
conservation of the lights.
It is especially important to avoid
extremely damp environments or other
environments that may cause abrupt
changes in temperature (condensation).

5. INSTALLATION AND ASSEMBLY

5.1. SITING.
CAUTION
KRIPSOL underwater lights are designed
to be built in to new swimming pools,
whether they are constructed using
concrete, polyester or use a liner. The
underwater light is held into its housing
by two stainless-steel A2 screws.
PH300.C Model.
For concrete swimming pools, with a
polyamide 6 gland.
PH301.C Model.
For concrete swimming pools, with
nickel-plated brass gland.
PHM300.C Model.
For concrete swimming pools, with a
polyamide 6 gland, including cable and
grommet.
PHM301.C Model.
For concrete swimming pools, with a
nickel-plated brass gland, including
cable and grommet.
PL300.C Model.
For polyester or liner swimming pools,
with a polyamide 6 gland.
PL301.C Model.
For polyester or liner swimming pools,
with nickel-plated brass gland.
PLM300.C Model.
For polyester or liner swimming pools,
with a polyamide 6 gland. Includes
cable and grommet.
10