Codonics Horizon User's Manual Addendum Gs/G2/G1 (150C); Summary; What Is Covered In This Addendum; Updating Safety Labeling - Codonics HORIZON G1 Bedienungsanleitung

CAUTION Be careful not to scratch the polished sheet metal or damage the sensor near the upper
guide notch.
CAUTION Make sure you do not overrotate the media guide, as shown below.
CAUTION Federal law restricts this device to be sold for use by or on the order of a physician.
CAUTION Use care when running the Purge Print Jobs function. This function will purge other users'
print jobs as well as yours.
CAUTION All files uploaded using anonymous FTP are readable by other FTP users. DO NOT upload
sensitive or classified information.

Codonics Horizon User's Manual Addendum GS/G2/G1 (150C)

Summary

The latest versions of Horizon® GS/G2/G1 Imager utilize hardware and software that is not compatible
with previous versions. New software Version 4.0.0 is required to support those changes.
The latest versions are identified by the imager serial number prefix 150C. Please contact your
Codonics representative for further information.
NOTE: Horizon Imagers with serial number prefix 150C cannot be downgraded to any previous
software version. Imagers with a serial number prefix other than 150C cannot have their software
upgraded to 4.0.0.

What Is Covered in This Addendum

The operator instructions for the Horizon Imager are provided in the Horizon Imager User's Manual.
This addendum covers functionality that is unique to the latest versions of the imager that run Version
4.0.0 software and replaces those sections in the existing manual. Unless specified in this addendum, to
operate the imager you can follow the instructions in the Horizon Imager User's Manual.

Updating Safety Labeling

The latest versions of the imager have the following updated safety labeling:
•
A new temperature warning label, shown below.
•
Pinch-point labels along the top of the thermal print head assembly, shown below.
•
Because the latest versions of the imager no longer include a barcode reader, laser safety labels
are not required.