Codonics HORIZON G1 Bedienungsanleitung Seite 23

CAUTION Resetting to the factory defaults will affect prints made by other users. Use caution when
changing default settings. Typically, it is better to specify sheet and image parameter settings from the
DICOM application or a PostScript printer's settings, or use a Job Settings file that contains the values
you need. For information about Job Settings files, refer to the Horizon Imager Technical Manual.
CAUTION Changing the imager's Default Media and Default User Settings could affect subsequent
prints made by other users. Use caution when changing default settings.
CAUTION Changing the imager's Default Media and Default User Settings could affect subsequent
prints made by other users. Use caution when changing default settings.
WARNING With the imager cover open, touch only those internal components that are colored green.
Remove rings, ties, jewelry, and other items, and tie back hair, so that they do not fall into or get caught
in the imager.
WARNING The thermal print head may be hot.
WARNING When cleaning the print head, avoid the extreme ends of the print head, which are sharp.
CAUTION Use only the print head cleaning wipe when cleaning the thermal print head. Also, do not
touch the glass surface of the thermal print head with your fingers; it could damage the print head. To
avoid touching the glass surface, you may want to wear gloves when cleaning the thermal print head.
CAUTION The thermal print head must be completely dry before attempting to use the imager.
Allowing the thermal print head to heat up again while still wet will damage the thermal print head.
WARNING With the imager cover open, touch only those internal components that are colored green.
Remove rings, ties, jewelry, and other items, and tie back hair, so that they do not fall into or get caught
in the imager.
CAUTION Use only the platen roller cleaning wipe when cleaning the platen. The platen roller could
be damaged if you use the print head cleaning wipe.
WARNING With the receive trays removed, touch only those internal components that are colored
green. Remove rings, ties, jewelry, and other items, and tie back hair, so that they do not fall into or get
caught in the imager.
CAUTION Use only the platen roller cleaning wipe when cleaning the pick tires. The tires could be
damaged if you use the print head cleaning wipe.
CAUTION Do not touch the pick tires (which may be white or green); body oils from your fingers are
hard to remove and could eventually damage the tires.
WARNING With the receive trays removed, touch only those internal components that are colored
green. Remove rings, ties, jewelry, and other items, and tie back hair, so that they do not fall into or get
caught in the imager.
CAUTION Use only cleaning swabs from a Barcode Reader Cleaning Kit.
CAUTION Do not scratch or nick the sheet metal. Scratches and nicks in the basement will damage the
printed side of ChromaVista sheets.
CAUTION Federal law restricts this device to be sold for use by or on the order of a physician.
WARNING With the top cover open, touch only those internal components that are colored green.
Remove rings, ties, jewelry, and other items, and tie back hair, so that they do not fall into or get caught
in the imager.
CAUTION Do not touch the pick tires (which may be white or green); body oils from your fingers are
hard to remove and could eventually damage the tires.
CAUTION To avoid damaging internal components, use care when removing a sheet from the media
path in the upper part of the imager.
CAUTION Never put a sheet back in the cassette. Dust or oil from your finger will affect the image
quality.
WARNING With the top cover open, touch only those internal components that are colored green.
Remove rings, ties, jewelry, and other items, and tie back hair, so that they do not fall into or get caught
in the imager.