Product Description And Specifications - Bosch GPO 14 CE Professional Betriebsanleitung

The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Secure the workpiece. A workpiece clamped with
u
clamping devices or in a vice is held more secure than by
hand.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for polishing and brushing metal
and coated surfaces as well as for polishing stone without
the use of water.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Fastening screw for bow handle
(2) Bow handle (insulated gripping surface)
(3) Spindle lock button
(4) Speed preselection thumbwheel
(5) On/off switch
(6) Grinding spindle
(7) Auxiliary handle (insulated gripping surface)
a)
(8) Clamping bolt
a)
(9) Clamping flange
a)
(10) Buffing wheel
a)
(11) Clamping nut
a)
(12) Spacer discs
a)
(13) Polishing disc
a)
(14) Round nut
(15) Lambswool bonnet for polishing disc
a)
(16) Polishing sponge
(17) Lambswool bonnet for polishing sponge
a)
(18) Rubber sanding pad
a)
(19) Sanding sheet
a)
(20) Felt polishing disc
a)
(21) Cup brush
(22) Handle (insulated gripping surface)
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Bosch Power Tools
Technical Data
Polisher
Article number
Rated power input
Power output
Rated speed
Speed adjustment range
Max. sanding pad diameter
Grinding spindle thread
Max. spindle length
Weight according to EPTA-Pro-
cedure 01:2014
Protection class
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.
Noise/Vibration Information
Noise emission values determined according to
EN 60745-2-3.
Typically the A-weighted noise level of the power tool are: 91
dB(A); sound power level 102 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
Vibration total values a
determined according to EN 60745-2-3:
Polishing:
a = 6.0 m/s
h
Disc sanding:
a = 4.5 m/s
h
The vibration level given in these instructions has been
a)
measured in accordance with a standardised measuring pro-
cedure and may be used to compare power tools. It can also
be used for a preliminary estimation of exposure to vibra-
tion.
The stated vibration level applies to the main applications of
the power tool. However, if the power tool is used for differ-
ent applications, with different application tools or poorly
maintained, the vibration level may differ. This can signific-
antly increase the exposure to vibration over the total work-
ing period.
a)
To estimate the exposure to vibration accurately, the times
when the tool is switched off or when it is running but not ac-
a)
tually being used should also be taken into account. This can
significantly reduce the exposure to vibration over the total
working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping the hands warm,
and organising workflows correctly.
W
W
-1
min
-1
min
mm
mm
kg
(triax vector sum) and uncertainty K
h
2 2
, K = 1.5 m/s
2 2
, K = 1.5 m/s
1 609 92A 45K | (28.05.2021)
English | 15
GPO 14 CE
3 601 C89 0..
1400
800
3000
750–3000
180
M 14
21
2.5
/ II