Specifications - Makita DML810 Betriebsanleitung

ENGLISH (Original instructions)

SPECIFICATIONS

Model:
LED
Rated voltage
Luminous flux
Operating time
(with BL1860B x2, all LEDs light up)
Maximum number of interconnectable appliances
Operating temperature
Storage temperature
Dimensions
(L x W x H)
Net weight
(without battery cartridge and power cord)
Protection degree
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Operating times are approximate and may differ depending on battery type, charging status, and usage condition.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Symbols
The followings show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
Only for EU countries
Ni-MH
Do not dispose of electric equipment or
Li-ion
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Take particular care and attention.
D.C.14.4 V Model
D.C.18 V Model
5 ENGLISH
0.2 W x 202
D.C. 14.4V / 18V
5,500lm / 3,000lm / 1,500lm
4 hours (5,500lm) / 18 hours (1,500lm)
0 °C ~ 40 °C
-20 °C ~ 60 °C
420 mm x 420 mm x 787 mm
DC: IP54 (only powered by battery pack)
AC: IP20
BL1415N / BL1430 / BL1430B / BL1440 / BL1450 / BL1460B
BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /
BL1840B / BL1850 / BL1850B / BL1860B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
DC18SH
Optical Radiation (UV and IR).
Minimize exposure to eyes or skin.
Do not stare at operating lamp.
Use appropriate shielding or eyes
protection.
Do not use the appliance in the rain or
snow when using with AC power.
Breaker restart button.
Power supply
The tool should be connected only to a power supply
of the same voltage as indicated on the nameplate,
and can only be operated on single-phase AC supply.
This tool should be grounded while in use to protect
the operator from electric shock. Use only three-wire
extension cords which have three-prong grounding-type
plugs and three-pole receptacles which accept the
tool's plug.
DML810
8
13.9kg