Motion Detection - Hama 00053116 Bedienungsanleitung

Click „Yes" to confirm the question about port enabling.
Subsequently, the camera is displayed in „My Network Places".
You can now access it by double-clicking it without entering the
IP address in Internet Explorer's address bar.
2.4.6 LoginFree
This function allows you to save a JPG picture of the live image
on the camera's web server. In this way, you can easily use the
camera's image for additional purposes, e.g. integrate it in a
homepage.
Enter a name for the image and confirm your choice by clicking
„Apply".
The image can then be displayed via an internet browser. Enter
the file name of the image after the camera's IP address in
Internet Explorer's address bar.
Example: IP address: 192.168.2.3 Image name: test.jpg
Entry in address bar: http://192.168.2.3/test.jpg
2.4.7 RTSP
Real-Time Streaming Protocol (RTSP) is a network protocol
used to control the continuous transmission (streaming) of
audio-visual data or software used on IP-based networks.
It is used to control the session between recipient and server.
RTSP port: Enter the desired RTSP port here.
MPEG4 RTSP path: Enter the desired RTSP path here.
H264 RTSP path: Enter the desired RTSP path here.
RTSP port range: Select the RTSP port range here.

2.5. Motion detection

2.5.1 General information
The motion detection function makes the wireless LAN camera
a simple surveillance device. A movement or change in the area
under surveillance is detected and, depending on the setting, the
system sends a video image of the change/movement by e-mail
or it is uploaded to an FTP server.
The first menu item enables you to turn motion detection on or
off. To do this, click „On" or „Off".
The monitoring interval defines an
Identification interval:
interval in seconds between each
check for motion or change in the
camera's field of vision.
The recording duration determines
Recording duration:
how long a registered movement is to
be filmed.
You can select intervals of 1 to 5
seconds.
Image format: Here you can decide if you want
to save/record a picture (JPG) or a film
(AVI) of the detected movement.
If the system detects motion, it records
Upload to FTP server:
a picture or video, which can be
uploaded to an FTP server (item 2.5.4).
Select „On" to activate this function.
If the system detects motion, it records
Send by e-mail:
a picture or video which can be sent
by e-mail to a preset address
(item 2.7.1). Select „On" to activate this
function.
Saving to SD card: If the system detects motion, it records
a picture or video which can be saved
to the SD card in the SD card slot.
Select „On" to activate this function.
Save your settings by clicking „Apply".
27