Klarstein VALDERAMA 10029347 Bedienungsanleitung Seite 12

EN
12
7
Fasten the blade holder
and the cover plate
to the fan blade with
three screws and spring
washers.
10
Tighten all screws and
make sure that the
screen is tight and that
no cables are trapped.
Attach the nylon chain
to the guide pin of the
upper bracket.
8
Fasten the fan bracket
to the motor with spring
washers and screws.
11
Attach the two pull cords
and make sure that the
retaining clip holds the
cord properly.
9
Attach the bulbs to the
lamp holder (max. 42 W
E27, not included).