Datalogic Magellan 2300HS Schnellreferenzhandbuch Seite 8

Green LED Indicator
The green LED
Table 2. Green LED Indications
LED INDICATION
a
Scanner (Green) LED on steady and dim
Scanner Active
(Normal Mode)
Scanner (Green) LED - bright flash
Good Read Indica-
a
tion
Scanner (Green) LED - Continuous flashing
Program Mode
Indication
Scanner (Green) LED flashes slowly
Sleep Mode Indi-
cation
Scanner (Green) LED 1-second off, 1/10-
second on
Host Disabled
Audible low tone 1 second. LED flashes con-
tinuously.
Field Replaceable
Unit (FRU) Warn-
ing (Error Mode)
Scanner (Green) LED flashes a coded
sequence in concert with the speaker.
FRU Indication
a. Certain functions of the LED are selectable to be enabled or disabled. Your scanner may not be programmed to display all indications.
4
(Figure 2d) indicates scanner status as shown in the table below.
DURATION COMMENT
The scanner is ready for operation. Scanning is immedi-
ately available.
Indicates a bar code has been read and decoded.
Indicates the scanner is in Label Programming Mode. Cycle
power to exit Programming Mode.
The scanner motor and/or laser have automatically
switched off and the unit has entered Sleep Mode due to
extended inactivity.
Host has disabled scanning.
Serves notice that a fatal FRU failure has been detected.
Call systems support for service.
Occurs ONLY upon Volume/Tone button push following a
FRU warning. Enables service technicians to identify FRU
failures.
Magellan™ 2300HS