Disposal; Warranty; Eliminating Possible Malfunctions; Spare Parts - VTI Select Ergo Gebrauchsanleitung

11 Disposal

Metal and plastic parts left over following maintenance and repair work must be properly
disposed of. If the pressure regulator is no longer used, it is disassembled by the
technical department responsible for carrying out maintenance or by the manufacturer
and sent for appropriate disposal.

12 Warranty

For the pressure regulator supplied, we offer a warranty for a period in accordance with our General
Conditions of Sale and Delivery, provided that the operating instructions are adhered to and that the
device is not subject to improper external interference. The warranty is limited to error-free functionality,
impermeability and flawless material. All other claims are excluded, unless otherwise stipulated by
mandatory legal provisions.
Also excluded are defects that are not attributable to our product, but to external influences, improper
handling or the failure to adhere to our operating instructions.

13 Eliminating possible malfunctions

Fault
Pressure gauge (2) does not
display a reading
Safety valve (3) is activated
(allows gas to escape
continuously)
Leak at the screw connection
between the pressure
regulator and valve
Screw connection to the
cylinder valve cannot be
loosened by hand

14 Spare parts

• hose adapter with O-ring (6)
VTI part no. 62231.14.0-S3
• O-Ring for adapter (6)
VTI part no. 0171.1.381
15 Manufacturer
VTI Ventil Technik GmbH
Iserlohner Landstr. 119
DE-58706 Menden
info@VTI.de
Your specialist retailer/customer service
Possible cause
Cylinder valve not opened
Cylinder is empty
Pressure gauge faulty
Malfunction in regulator
system
Seal missing or damaged
Residual pressure between
valve and pressure
regulator
O-rings for the cylinder connection
gas
Oxygen
300 bar
Oxygen
200 bar
Air 200 bar
All 200 bar
Nitrous oxide
Carbon dioxide Germany
Remedy
Open the valve
Connect a new cylinder
Inform customer service
Inform customer service
Inform customer service
See the section "Turning off the
pressure regulator and connecting
it to a new gas cylinder"
country / standard VTI part no.
ISO-standard 0171.1.535
Germany 0171.1.351
Great Britain,
0171.1.381
Netherlands
Italy, Denmark 0171.1.352
France, Spain 0171.1.532
Germany
0171.1.365
PIN Index ISO 407 0171.1.372
Germany
0171.1.620
0171.1.352
13 / 13