Installation
Software
Network Adapter Configuration
Note: The menus can look different to the following description, depending on the used
Windows version and the installed patches.
Fig. 99 Hardware installation
96
Connect the terminal cable to a COM port of the
PC if a terminal is present .
Install Prinect Shooter, CTP User Interface and
DIAG on this PC.
The operating system will detect new hardware
when the PC is switched on for the first time. Can-
cel any driver updates suggested by the operating
system since the required drivers are supplied with
the Container software. They will be installed as
described below during installation.
In the "Hardware Wizard" choose option "No, not
this time".