4. Power connection
Fig. 14 Power Connection
5. Cover panels in the plate loader (Mod Kit 1039H, PG.995.016N)
Electric shock hazard and hazard of being crushed by moving parts!
The Suprasetter 145/162/190 may not be operated with the APL if the cover pan-
els replacing the rear panel are not fitted properly.
Suprasetter 145/162/190 – Installation
Open the door of the electronics cabinet of the
plate loader and if necessary, remove the cover of
the power supply.
Connect the cable (Fig. 14/3) from the APL to
X400b (Fig. 14/2).
Use a cable clamp (Fig. 14/4) to connect the shield
of the cable to ground.
Screw on the additional PE cable (Fig. 14/1).
Fit the cover of the power supply on again.
WARNING
Optional Components
119