4
MOUNTING AND CONNECTIONS
1
The LED strip can be cut every 5 cm at the
2
Fix the LED strip at a desired place by means of the self-adhesive foil
on the rear side. The installation place should be clean, dry and free
of grease. Various profile frames are available as accessory.
3
Connect the LED strip to a power unit (12 V) or a controller. Matching
items are available as accessory, e.g. 50530555 EUROLITE LED
Strip RGB Controller, 50530559 IR-5 Remote control and 50533550
TP-320 Wall controller with touch pad.
...............................................................................................................................................
5 5 5 5
CLEANING AND MAINTENANCE
Disconnect from mains before starting maintenance operation!
We recommend a frequent cleaning of the device. Please use a moist, lint-
free cloth. Never use alcohol or solvents!
There are no serviceable parts inside the device. If defective, please dispose
of the unusable LED strip in accordance with the current legal regulations.
Should you have further questions, please contact your dealer.
www.eurolite.de
DANGER TO LIFE!
10
cutting marks.