Assembly - Zipper Maschinen ZI-COM200-10 Betriebsanleitung

Safety instructions when working with compressed air guns
Compressor pump and lines reach high temperatures during operation. Touching cause burns
•
When removing the hose coupling, hold the coupling piece of the hose is by hand. So the injury from
•
rebounding hose is avoided
Safety instructions when paint spraying
Do not process paints or solvents with a flash point of less than 55 ° C.
•
Do not heat paints and solvents.
•
If harmful liquids processed use dust masks. Note the instructions on protective measures made by
•
the manufacturers of such substances.
During the paint spraying process and in the work space may not be smoked. Even paint fumes are
•
highly inflammable.
In working area smoking and open flames are forbidden during paint spraying.
•
Do not keep or consume food and drinks in the working area. Paint fumes are harmful.
•
Work only in a well ventilated area that is bigger than 30m³. Do not spray against wind direction.
•
Note the local regulations.
Do not process white spirit, butyl alcohol and methylene chloride when use PVC hoses because
•
lifetime will substantially reduces
Operation of pressure vessels
Anyone who operates a pressure vessel has this to get in proper condition, operate it properly,
•
monitor, make any necessary maintenance and repair work without delay and to meet the
circumstances necessary security measures.
A pressure vessel may not be operated if it has defects or will endanger employees or third persons.
•
The pressure vessel must be regularly checked for damage such rust,..assembly
•
Please check the product contents immediately after receipt for any eventual transport damage or
missing parts. Claims from transport damage or missing parts must be placed immediately after
initial machine receipt and unpacking before putting the machine into operation. Please understand
that later claims cannot be accepted anymore.
11.3

Assembly

Wheels:
Mount the wheels like on the picture
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-COM150-10 ; ZI-COM200-10
SAFETY
19