Setting Up The Cordless Camera - Panasonic KX-TGA914EX Bedienungsanleitung

TGA914EX_1(e).book Page 7 Tuesday, August 8, 2006 2:21 PM

Setting up the cordless camera

Connecting the AC adaptor and the call button
Connect the AC adaptor cord by pressing the plug firmly (A). Connect the call button cord
until it clicks into the unit (B).
L Use only the included AC adaptor.
A
Note:
L When the AC adaptor is connected, the indicator lights in red then starts flashing.
L The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel
warm during use.)
L The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do
not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor
may cause it to become disconnected.
B
Hooks
Preparation
(220–240 V, 50 Hz)
7