Dual Sound; Woofer Level; Volume (Headphone Volume); Reset - Sony PDP Bedienungsanleitung

Dual Sound

Woofer Level

Volume (headphone volume)

Dual Sound

Reset

26
GB
Selects the sound from the speaker for a stereo or bilingual broadcast.
1
Press OK to select "Dual Sound".
2
Press M/m to select one of the following, then press OK.
Stereo, Mono: For a stereo broadcast.
A/B/Mono: For a bilingual broadcast, select "A" for sound channel 1, "B" for sound
channel 2, or "Mono" for a mono channel, if available.
Tip
If you select other equipment connected to the TV, set "Dual Sound" to "Stereo", "A" or "B".
Adjusts the output level of the built-in woofer of the TV.
1
Press OK to select "Woofer Level".
2
Press </, to set the level, then press OK.
Adjusts the volume of the headphones.
1
Press OK to select "
2
Press </, to set the level, then press OK.
Selects the sound of the headphones for a stereo or bilingual broadcast.
1
Press OK to select "
2
Press M/m to select one of the following, then press OK.
Stereo, Mono: For a stereo broadcast.
A/B/Mono: For a bilingual broadcast, select "A" for sound channel 1, "B" for sound
channel 2, or "Mono" for a mono channel, if available.
Tip
If you select other equipment connected to the TV, set "
Resets the "Treble", "Bass" and "Balance" settings to the factory settings.
1
Press OK to select "Reset".
2
Press M/m to select "OK", then press OK.
Volume".
Dual Sound".
Dual Sound" to "Stereo", "A" or "B".