Maintenance; Ordering Parts - Community Playthings V860 PlayFrames Gebrauchsanleitung

Disassembly
1. Remove all accessories from the frame. Do this by pressing in both yellow buttons at the end of the accessory and lifting it out of the Perch.
(Figure J)
2. Remove the Perches by disengaging the latches and lifting the Perches off. (Figure K)
3. Remove the platforms (Figure L). You must release both latches. Two people doing this together is the easiest.
Figure J
Figure K Figure L
4. Once everything has been removed from the frame, disconnect the panels: Lift the yellow cap with a key or other tool. (Figure M)
5. Pull the tops of the panels apart. (Figure N)
6. Lift the bottom hinge apart. (Figure O)
7. Repeat steps 4–6 for the second corner.
Figure M Figure N Figure O

Maintenance

Visually inspect before each use for cracks, breaks, loose and/or missing parts. Ensure all connections are fully engaged.
Every 1 to 3 months test all connections to ensure they are functioning properly.
Remove the product from service if any condition develops which might make operation unsafe. If you plan to store your PlayFrame, remember it is
made of wood and should be kept in a dry place.
Construction
The wooden components are manufactured from solid birch wood or from birch or beech plywood and are protected with a durable child-safe
finish. Bamboo panels are made of sanded bamboo strips laminated onto a plastic core.
Cleaning
Wipe with a damp cloth and mild detergent. Dry immediately. Leaving water or cleaning agent on the surface may damage the finish. Do not use
abrasive cleansers.
User modifications
We are not responsible for modifications made by customers to our products in the field, without our supervision, testing, or evaluation.

Ordering parts

To order replacement parts, contact customer service with a description of the part(s) needed and the ID code from the product.
Use only replacement parts supplied by Community Playthings.