Community Playthings A698 Gebrauchsanleitung

Product guide
A698 Sand and water storage shelf
IMPORTANT
Save these instructions for reference
Recommended use
This Storage shelf provides a place to store toys and accessories used
in sand and water play or other messy activities. Compartments with
grates allow wet items to drain, with a drip tray beneath to catch water
or mess. A vertical slot at the back provides a safe place to store two
Sand and water table lids.
Recommended for children ages 1 to 6 years.
WARNING
c This product is intended for use by children of immature judgment,
therefore supervision is required at all times.
CAUTION
c Water on the floor is slippery. Clean up spills.
c This product is intended for indoor use only.
c When storing and retrieving lids, grasp firmly so they do not drop.
Assembly
The Sand and water storage shelf delivers fully assembled in a single
carton. The drip tray ships in a smaller carton inside the main carton.
Fit the drip tray by placing it beneath the lower compartments between
the two wooden rails.
If your shipment is incomplete, please call customer service.
Operation
Two Sand and water table lids may be stored in the slot at the back of
the shelf.
Small items dropped into slot may be retrieved from the gap at the
back of the shelf.
Community Playthings Deep totes fit into the shelf compartments and
can be individually labelled.
To move shelf, flip up the trim, roll to a new location, and flip it back
down for a perfectly stationary unit.
Storage
The Sand and water storage shelf should be stored indoors.
Maintenance
Periodically inspect for cracks, breaks, loose parts, missing parts, and/
or malfunctions. Remove the product from service if any condition
develops that might make operation unsafe.
Community Playthings, Brightling Road, Robertsbridge, TN32 5DR
communityplaythings.co.uk • sales@communityplaythings.co.uk • 0800 387 457
© 2020 by Community Products (UK) Ltd •
FX06 Eu 0636 Revision 00
Cleaning
The drip tray can be washed with soap or mild detergent and water.
Disinfectants can be used. Do not use abrasive cleaners. Wipe wooden
components with a damp cloth and mild detergent. Dry immediately.
Construction
The frame is made of solid hardwood protected with a child-safe finish.
The shelf compartments are made of impact-resistant plastic.
The drip tray is made from PETG plastic.
All of the packaging from this product is recyclable (card-
board and LDPE). Please recycle in accordance with local
guidelines.
User modifications
We cannot be responsible for modifications made by customers to our
products in the field without our supervision, testing, or evaluation.
Ordering parts
To order replacement parts, contact customer service with a
description of the part(s) needed and the ID code from the product.
Use only replacement parts supplied by
Community Playthings.