Community Playthings W441 Gebrauchsanleitung

Product guide
W441, W439 Outlast streambed and flow pan
IMPORTANT
Save these instructions for reference
Recommended use
The Outlast streambed introduces running water into your
outdoor play area. Contoured trays on three levels with
outflow allow water (or natural loose parts) to flow down.
The Flow pan adds additional water storage with a child
friendly rubber plug. The Streambed provides a transition
between high and low tables in a variety of configura-
tions but is designed to empty only into the 46cm table.
WARNING
c This product is intended for use by children of immature judg-
ment, therefore supervision is required at all times.
c Water is a drowning hazard. Do not leave pan of water
unattended.
CAUTION
c Adults are responsible to prevent Outlast water tables from
being employed by children in unsafe combinations with other
components.
Assembly
Your Streambed comes fully assembled and ready to use. It includes
the Streambed with three contoured trays and one Flow pan.
If your shipment is incomplete, please call customer
service. All of our packaging is recyclable (cardboard and
LDPE). Please recycle in accordance with local guidelines.
Accessories
Outlast flow pan adds an extra level and water flow possibilities.
Community Playthings, Brightling Road, Robertsbridge, TN32 5DR
communityplaythings.co.uk • sales@communityplaythings.co.uk • 0800 387 457
© 2019 by Community Products (UK) Ltd •
CB86 Eu 0709 Revision 01
Construction
The wooden components are manufactured from long lasting
acetylated wood and finished with a nontoxic stain. All edges and
corners are rounded for safety and ease of cleaning.
Stainless steel hardware is used throughout and plastic components
are UV-resistant and engineered to ensure long life in outdoor
environments.
Maintenance
The Streambed can be left outside all year around. Acetylated
wood weathers to a natural silver grey if left untreated outdoors. If
you prefer the original look, scrub with a detergent or disinfectant
solution. When dry, apply a tinted, nontoxic penetrating stain.
Refinishing stain is available from customer service.
Periodically inspect for splinters, broken or loose parts, and/or
malfunctions. Remove from service if any condition develops that
might make operation unsafe.
Cleaning
Mud and dirt can be removed with scrub brush and water. Over
time outdoors, surfaces may blacken with mildew. Remove with
detergent or a disinfectant solution such as Milton Sterilising Fluid.
Trays can be removed for cleaning.
User modifications
We cannot be responsible for modifications made by customers
to our products in the field without our supervision, testing, or
evaluation.
Ordering parts
To order replacement parts, contact customer service with a
description of the part(s) needed and the ID code from the product.
Use only replacement parts supplied by Community
Playthings.